Propane Gas Regulator Valves , Acme Type 1 tank fittings, Custom length hoses and Quick Connect hoses   Sturgis brand propane gas regulators for high pressure propane regulation on tanks.  Preset (10 psi or 20 psi) or Adjustable pressure regulators (0-20 psi is the norm and 0-30 psi or 0-60 psi for circumstances where higher gas volumes are required).  Outdoor high heat cookers most often use high pressure propane from tanks which require a high pressure regulator.   Gas grills up to about 50,000 btu/hr most often use low pressure propane which require a low pressure propane regulator.  Examples of low pressure gas are natural gas, pressure regulated propane piped into a trailer home or RV, or a conventional home in which the gas has already been adjusted to a low pressure at the large propane tank outdoors or underground.  This preset low pressure is normally 6 ounces.  Our preset propane regulators are also set at 6 ounces.  Residential natural gas pressure in most areas is 10 ounces and does not require any regulator.  All prices listed INCLUDE shipping.  {Handy conversions:  1" WC = 0.036127 psi , 16 oz. = 1 pound}

 High Pressure Gas Regulator (higher than 1 psi) w/ Hose

 Propane Regulator Combo  Assembly consists of a 10 psi PRESET  high pressure propane regulator valve, a POL propane tank fitting, and a five foot x 1/4"ID UL approved hose.  Suitable for outdoor cooking appliances such as cast iron burners or cookers.  Weight 5#.  Free shipping.  (ref #106227-60)

 Propane Regulator Combo  Assembly consists of a 10 psi PRESET  high pressure propane regulator valve, a POL propane tank fitting, a UL approved ball valve for positive shut off, and a five foot x 1/4"ID UL approved hose.  Suitable for outdoor cooking appliances such as cast iron burners or cookers.  Weight 5#.  Free shipping.

 Propane Regulator Combo  Assembly consists of an ADJUSTABLE (0-20 psi) high pressure propane regulator valve, a POL propane tank fitting, and five foot x 1/4"ID UL approved hose.  Suitable for outdoor cooking equipment such as cast iron burners or cookers.  Weight 5#.  Free shipping. (ref# 106233-60).  We will install any of the Sturgis Gas Quick Connect hose assemblies on any of our gas regulators. See the optional items below.  This regulator is also available with a pressure gauge which  helps you dial in repeatable settings. See COMRI-20 below.

 Propane Regulator Combo  Assembly consists of an ADJUSTABLE (0-30 psi) high pressure propane regulator valve, a POL propane tank fitting, and five foot x 1/4"ID UL approved hose.  Suitable for outdoor cooking equipment such as cast iron burners or cookers where more gas flow is required than usual.  Weight 5#.  Free shipping.  (ref #106232-60)  Also available with a pressure gauge.  This helps you dial in repeatable settings.  See COMRI-30.  Also available with the convenient Red Acme model 204077 wrench-less tank connector shown further down on this page.

 Propane Regulator Combo  Assembly consists of an ADJUSTABLE (0-60 psi) high pressure propane regulator valve, a POL propane tank fitting, and five foot x 1/4"ID  UL approved hose.  Suitable for outdoor cooking equipment such as cast iron burners or cookers where more gas flow is required than usual.  Weight 5#.  Free shipping.  (ref# 106229-60)  Also available with a pressure gauge. This helps you dial in repeatable settings.  See COMRI-60.  Also available with the convenient Red Acme model 204077 wrench-less tank connector shown further down on this page.

 Propane Regulator Combo  Assembly consists of a 20 psi PRESET  high pressure propane regulator valve, a POL propane tank fitting, a fine adjustment NEEDLE VALVE, and a five foot x 1/4"ID  UL approved hose.  Suitable for outdoor cooking equipment such as  a cast iron burner or cookers.  Weight 5#.  Free shipping. (ref #106125-60)

 Propane Regulator Assembly for Weed Burners  .  Consists of an adjustable high pressure propane regulator valve, POL propane tank fitting, and a ten foot hose.  This is the COM#2 high pressure propane setup but with a longer 10 foot hose perfect for use with all outdoor propane weed burners or instances when you simply need a longer hose for a cast iron burner.  Weight 6#   Free shipping. (ref# 106233-120)

 Propane Regulator Duo Combo  Consists of COM#1 20 psi PRESET high pressure propane regulator assembly with TWO needle valves and TWO UL approved five foot  x 1/4"ID hoses.  Weight 8#.  Free shipping. (ref#106206-60-60)

 Cart Combo Hose Assembly  Propane Regulator Combo for Propane Camp Stove Burner Cart  Assembly consists of a 10 psi PRESET  high pressure propane regulator, POL propane tank fitting, and a 16" x 1/4"ID  hose which has been custom designed for the Propane Camp Stove Burner Cart.  Weight 5#.   Free shipping.

 Propane 20 PSI Regulator & Pressure Gauge Assembly consists of a (0- 20 psi) ADJUSTABLE high pressure propane regulator assembly, POL propane tank fitting, and with a pressure gauge and five foot  x 1/4"ID UL approved hose. Perfect for adjusting the pressure flow to a repeatable setting.  (Note that the actual pressure gauge on this model will have a range of 0-60 psi.)  Weight 6#, Free shipping.  (ref#106231-60)

 Propane 30 PSI Regulator & Pressure Gauge Assembly consists of a (0-30 psi) ADJUSTABLE high pressure propane regulator assembly, POL propane tank fitting, and with a pressure gauge and five foot x 1/4"ID  UL approved hose. Perfect for adjusting the pressure flow to a Repeatable setting. (Note that the actual pressure gauge on this model will have a range of 0-60 psi.)  Weight 6#, Free shipping. (ref#106223-60)   Also available with the convenient Red Acme model 204077 wrench-less tank connector shown further down on this page.

 Propane 60 PSI Regulator & Pressure Gauge Assembly consists of a (0-60 psi) ADJUSTABLE high pressure propane gas regulator valve assembly, POL propane tank fitting, and with a pressure gauge and five foot x 1/4"ID  UL approved hose. Perfect for adjusting the pressure flow to a Repeatable setting. (Note that the actual pressure gauge on this model will have a range of 0-100 psi.)  Weight 6#, Free shipping. (ref#106224-60)    Also available with the convenient Red Acme model 204077 wrench-less tank connector shown further down on this page.

 Optional ACME Type 1 wrench-less tank connector

 Green ACME Inlet Fitting  Type 1 Green ACME  appliance fitting is a wrench-less, user friendly, right hand connector with excess flow and a thermally sensitive sleeve for extra safety.  1 5/16" ACME x 1/4" M NPT.  200,000 btu/hr maximum output capacity.  Designed for all high pressure propane gas regulator valves  up to 30 psi.  For use on large volume gas grills over 65,000 btu/hr.  Not for use with equipment requiring low pressure.  Order one and we will install it on the regulator you order.  No installation charges.  Pictured below, for example,  is a Green ACME inlet fitting installed on a COM#3 regulator assembly. Weight 1#. Free shipping

.  Acme fittings make changing out empty tanks easy!

 Red ACME Inlet Fitting  Type 1 Red ACME appliance fitting is a wrench-less, user friendly, right hand connector with excess flow and a thermally sensitive sleeve for extra safety.   1 5/16" x 1/4" M NPT.   500,000 btu/hr maximum output capacity.  Designed for the 0-60 psi series adjustable high pressure propane gas regulator valves.  Not for use on smaller gas grills and other low pressure devices.   Order one and we will install it on the regulator you order.  No installation charges.    Pictured below, for example, is a Red ACME inlet fitting installed on a COMRI-60 (0-60 psi) regulator assembly.  Weight 1#.  Free shipping

.  Acme inlet fittings are wrench-less!

 Optional Hose Length

 ! Do you need a longer propane High Pressure Hose (1/4" ID) on the gas regulator you are ordering above?  We can change out the standard 5' propane 1/4" ID high pressure Black hose for a longer 10', 15', or 20' hose.  The charge is:  $10 (10'),  $20 (15'), or  $30 (20'). Select your choice at the right: 

 Optional Quick Connect Hose with one Appliance Pigtail

 ! Do you want a high pressure quick connect hose installed on the gas regulator you are ordering?  Select the length of quick connect hose to be installed on the regulator in place of the standard 5' hose.   Each hose combo assembly below comes with one 9" pigtail which should be attached permanently to your appliance.   Additional pigtails for other appliances are available at Gas Quick Connect.   See examples of how this quick connect hose assembly works with a high pressure propane gas regulator valve: 

 Low Pressure Propane Regulators (6 ounces pressure) - low pressure propane gas regulators are used to reduce the pressure to about 6 ounces.  Most low btu/hr gas appliances require low pressure.  Check with the appliance manufacturer to determine the working gas pressure needed. Most residential gas grills operate at low pressure.  Our low pressure regulators come with 3/8" ID gas outlets and are supplied with 3/8" ID UL (Underwriters Laboratories) and AGA (American Gas Association) approved hoses to insure maximum gas flow.  100,000 btu/hr maximum output.

 Low Pressure Regulator Assembly  consists of a POL fitting, low pressure PRESET propane gas regulator valve  (which reduces the tank pressure to about 6 ounces, 10.5 " WC), and a five foot, 3/8" ID UL approved AGA hose with swivel connection.  Weight 5#.  Free shipping.  (ref #106251-60)    This is the working pressure that most residential barbecue grills operate at.  Check your instruction manual to see the maximum btu/hr output of your grill.  If it does not exceed 65,000 btu/hr then a preset low pressure propane regulator is probably what you should be using.  Check your product manual or consult the manufacturer.

 Low Pressure Regulator Assembly  consists of a POL fitting, low pressure PRESET gas regulator valve (which reduces the tank pressure to about 6 ounces, 10.5 " WC), UL approved ball valve for positive shut off, and a five foot 3/8" ID UL approved AGA hose with swivel connection.  Weight 5#.  Free shipping.

 Low Pressure Regulator Duo Combo consists of a POL fitting, low pressure PRESET gas regulator valve (which reduces the tank pressure to about 6 ounces, 10.5 " WC), two needle valves for control of gas through each hose,  and two five foot  3/8" ID UL approved AGA hoses.  Weight 5#.  Free shipping.

 Optional ACME Type 1 wrench-less tank connector

Black ACME Inlet Low Pressure Fitting  Type 1 Black ACME low pressure appliance fitting is a wrench-less, user friendly, right hand connector with excess flow and a thermally sensitive sleeve for extra safety.  1 5/16" ACME x 1/4" M NPT.  100,000 btu/hr maximum output capacity designed for low pressure propane regulators (our COM#5 series, hoses, and other fittings.  Perfect  for use with most gas grills and other low pressure devices.  Order one and we will install it on the regulator you order.  No installation charges.   Pictured below, for example, is a Black ACME inlet installed on a COM#5 regulator assembly.   Weight 1#. Free shipping. 

   Acme fittings make changing out empty tanks easy!

Dual Tank Automatic Changeover Low Pressure Regulator assembly   This low pressure regulator automatically switches from the empty propane tank to the full reserve tank, ensuring a continuous gas flow.  The color of the dial also changes from a highly visible green to red signaling that the  first cylinder is exhausted while the valve automatically changes to the remaining full tank. Rotation of the handle to the full cylinder will restore the green color on the indicator.  The built in safety back check allows one to change out the empty tank while the full tank is operational. High output 160,00 btu/hr capacity,  1/4" female inverted flare inlets x 3/8"ID female NPT outlet, complies with UL144 and NFPA 1192 requirements for use with recreational vehicles, and INCLUDES a mounting bracket (see below) and RVIA required regulator plastic cap cover (regulator alone without cap is shown below).  Supplied with two model 100575-24  24" x 1/4" ID, 350 psi thermoplastic tank hoses and Green ACME tank fittings x 1/4" inverted flare with safety back check inlet fittings and a 5' x 3/8"ID UL approved AGA low pressure outlet hose with a standard female 3/8" SAE gas flare swivel fitting.  (regulator with 3 hoses shown at right).  With integral mounting bracket shown below which is convenient to mount to a post or a 2 x 4 block.  This is the ultimate solution to avoid running out of gas.  Also available with optional longer Low Pressure AGA hoses (see options listed above).  Weight 7#.  Free shipping.

Dual Tank Automatic Changeover Low Pressure Regulator assembly with Stainless Steel Overbraid tank hoses  This low pressure regulator automatically switches from the empty propane tank to the full reserve tank just like the COM-AC above but is supplied with two model 100699-24  24" x 1/4" ID, 350 psi thermoplastic high pressure tank hoses with Stainless Steel Overbraid (which provides even more protection to the high pressure hoses).      Weight 7#. Free shipping. 

This is the ultimate solution to avoid running out of gas.  Also available with optional longer Low Pressure AGA hoses (see hose length options listed below).

High Volume Output Low Pressure Regulator Assembly  consists of a Green Acme Type I tank fitting, low pressure high output PRESET regulator (which reduces the tank pressure to about 6 ounces, 10.5 " WC), and a five foot, 3/8" ID UL approved AGA hose with swivel connection.  For low pressure applications requiring higher gas volume output, 160,000 btu/hr maximum output.   (ref #108053P-60)  Also available with optional longer Low Pressure AGA hoses (see low pressure AGA hose options listed below).  Also available with conventional soft nose POL tank fitting at same price - just ask.  Weight 5#.  Free shipping.

 Optional Hose Length for Low Pressure Regulators

! Do you need a longer Low Pressure AGA Hose (3/8" ID) for one of the COM5 series of Low Pressure Regulators you are ordering in the low pressure regulator section above?  We can change out the standard 5' low pressure 3/8" ID GREY AGA hose to a longer 10', 12', 15', or 20' length.   The charge is:   $15 (10'),  $21 (12'),  $30 (15'),  or  $45 (20').  Select your choice at the right:

  All Sturgis propane gas regulators, gas hoses, and quick connect hoses are pressure tested under pure nitrogen to insure quality propane regulation.

© 2011 GasHosesandRegulators.com